Spreading heat arrange machine (RPLF-1 series)

                   RP LF-1 Spreading heat arrange machine is used in the textile and lace industry as peripheral equipment. Mainly applied to textile, lace embroidery enterprise for product after process and arrangement, and it is the guarantee of products quality. This machine is featured in small size, low cost, environmental protect, low requirement of production condition, easy in install and use, and it has been welcomed by related industry. Humidify chemical blended fabrics, polyester filament, polyester drawn textured yarn knitted fabric, cotton knitted fabric, blend fabric etc. All could be spreaded and arrange according to customer requirement, at the same time, it also supply with heating and drying, cleanup the fabric tension, coordinate with fabric latitude and longitude, for better leveling ,stable products. Electric spreading & heat arrange machine will greatly save your fabric setting cost, power usage: 20 degrees per hours.

Weaving is a crisscross network, its weaving method never change from birth till now, and how to let the woven fabric to be very flat and smooth is always very difficult mission to solve. RPLF-1 Spreading heat arrange Machine will provide you the best solution on this.
Spreading heat arrange Machine is like its name, it is using some solutions to let the woven fabrics to be very flat and smooth.The well-known electric ironing machine is one kind of this style machine, its disadvantage is its ironing area is small, and its temperature is uneven distribution, and what's more it cannot clean up the weaving warp and weft to order, so to greatly damaged the aesthetic feeling of the woven fabric surface.

Disadvantages of traditional heat arrange machine:

It is a tube style oil heating machine, its working principle is adopting horizontal boiler (4 tons) to heating up the oil, and then the oil will inflow to the heating tube net, adopting the heat cycle theory and air circulation theory to adjust the temperature and satisfy the different woven fabrics with the different heating temperature requirement. Its advantage is large production, very big Spreading heat arrange space, and heating room has constant temperature etc. It has the follow disadvantages:

• It is most suitable for large-scale textile printing and dying enterprises
• It has very bad pollution: the oxidation from the boiler burning, and the pollution to the air, and the woven fabric pollution from the air circulation.
• Need very huge investment, this item need general invest of USD450,000.00
• Big floor area, it need minimum 500 square meter for the working area.
• Changing to a different color woven fabric stentering need very long time: nearby 6 hours.
• It has very low working efficiency if the Simplex woven fabrics quantity for the stentering and heating lower than 5000m.

RPLF-1 Spreading heat arrange Machine will provide you very good solutions. It has overcome all the above difficulties. It is a electric heating machine, and it has all basic functions of big spreading machine, and It is smaller size only 2.4mreter in width and 4.6 in length can arrange fabric of 1.8meter wide, low energy consume, fast startup, and no pollution. This machine will provide u the best solutions to clean up the finished embroidery products with the very high quality, very good third dimension, and very flat. It will greatly decrease your cost in the products stentering and heating. Using RP spreading heat arrang machine , cotton color proof making will be a very easy thing. And it needs the floor area of 50 square meters only. And easy operation, whole machine transportation, and the machine once reached and can come to producing condition.

              

RPLF-1 Spreading heat arrange Machine has provided a very good solution that traditional spreading machine cannot solve. It is most suitable for embroidery field, for this field have abundant laces work need heating setting, and lace products have the follow features:

• It is valuable products.
• It needs high quality heat setting technology, for the lace will be directly used on garment after heat setting. Especially, high temperature setting will do great chroma effect to the dyed products. And the embroidery has very strict demand in the weaving warp and weft.

      

Special Features:

• Operating method: A: electric heat, heat balance constant temperature. B: monolayer level recycling chain
• Operating width: 1,200 to1800mm
• Design speed: 2 to 15meter/minute depends on fabric type.
• power usage: 20 degrees per hours
• Transmission: user-machine interface control and servomotor synchronized adjusting transmission
• Method of fabric supply: needle plate
• Inner box running temperature: 250°C.
• Voltage: 380V
• Frequency: 50Hz, 3pH
• Control power: 220V
• Warm up power: 70kW (40 to 60 minutes)
• Constant temperature: 5 to 10kW (operating temperature)
• Dimensions: 6,00(H) x 4,60 (L) x 2,400mm(W)
• Customers can book the model according to their requirements.